====== DC Distributor 3pin RS ======
<WRAP left round info 80%>
The product is solely and exclusively available for commercial costumers and shall be used by skilled personnel only.

Use the product only for the purpose described in this document. Always follow the valid instructions and system requirements for all equipment involved.
</WRAP>
===== Description =====
Series of compact voltage distributors with 3pin RS((aka. "Fischer")) sockets. Due to the small size and the many configuration possibilities, the distributors are perfectly suited to be mounted on the camera or to be used in a WCU setup.

All distributors are made of aluminium, black anodised and have a CE marking.

Apart from an LED which indicates the presence and polarity of voltage, the distributors doesn't contain any further electronics, such as overvoltage or over current protection (aka. fuse), reverse polarity protection or similar.
 <WRAP alert 80% round>
Never connect **two** voltage sources at the same time!!
</WRAP>
In all distributors, the housings of the sockets have an electrical connection to each other in order to protect the electronics of the camera when connecting accessories with HD-SDI interface. This requires the use of shielded cables and avoiding plugs whith plastic housings (e.g. D-Tap).

More information from Arri:
  * [[https://www.arri.com/resource/blob/195968/994529ee419abe1e2ca0dfbf95c4b4e1/marc-shipman-mueller-data.mp4|Video explaining the phenomenon]]
  * [[https://www.arri.com/resource/blob/194752/d3093e6af632150787ec95d176a39958/download-technical-information-data.pdf|technical information]] (ca. 82kB)

===== Features =====
  * //Size "S"//: three((1 x input, 2 x output)) interfaces RS 3pin
  * //Size "M"//: five((1 x input, 4 x output)) interfaces RS 3pin
  * matching plugs((Odu)) //Output:// S10F1C-P03M, W10F1C-P03M((angle plug)); //Input:// S10F1C-P03L, W10F1C-P03L((adjustable right angle plug))
  * distributors with fixed supply cable have a dedicated input((can be used as output, though it's not recommended))
  * fixed supply cable with RS connector((also with angle plug))
  * different supply cables available
  
  * presence and polarity display of voltage
  * S/S an Tally signal is passed throug
  
<WRAP hide>
  * 3D file of bracket available for download((for your own 3D printing))
  * 3D file of distributor available((for building your own brackets))
  </WRAP>
==== technical Details ====
  * Voltage: 9 - 30 V
  * Ampere: 0 - 3 A
  * Temperature: -10 - 40°, not condensing  
===== Model Overview =====
There are two different sizes available, each with a fixed cable or with a detachable, separate supply cable.
==== Size "S" ====
<columns 100% >
=== Dimensions ===
{{:masszeichnung_mx24.png?&direct|all dimensions in mm}}

**Weight:** ca. 35g (without bracket)
<newcolumn>
=== Without Fixed Cable ===
{{:3512.jpeg?0x250|}}
<newcolumn>
=== Fixed Cable ===
{{:3512r.jpeg?0x250|fixed cable, available with various connectors}}
</columns>
==== Size "M" ====
<columns 100% >
=== Dimensions ===
{{:masszeichnung_mx26.png?&direct|all dimensions in mm}}

**Weight:** ca. 50g (without bracket)
<newcolumn>
=== No Cable ===
{{:3514.jpeg?0x250|}}
<newcolumn>
=== Fixed Cable ===
{{:3514r.jpeg?0x250|fixed cable, available with various connectors}}
</columns>

===== Disposal =====
<WRAP center round info 60%>
The product can be returned to the manufacturer. 
When disposing of accessories, please observe the relevant manufacturer's instructions.
</WRAP>
\\

{{:weee.svg |}}
This product falls within the scope of Directive 2012/19 / EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of June 4, 2012 on waste electrical and electronic equipment (WEEE II).

Accordingly, this product must not be disposed of with household waste. There are the respective country-specific disposal rules that must be observed.