DC Distributor 3pin RS

Series of compact voltage distributors with 3pin RS¹⁾ sockets. Due to the small size and the many configuration possibilities, the distributors are perfectly suited to be mounted on the camera or to be used in a WCU setup.

All distributors are made of aluminium, black anodised and have a CE marking.

Apart from an LED which indicates the presence and polarity of voltage, the distributors doesn't contain any further electronics, such as overvoltage or over current protection (aka. fuse), reverse polarity protection or similar.

In all distributors, the housings of the sockets have an electrical connection to each other in order to protect the electronics of the camera when connecting accessories with HD-SDI interface. This requires the use of shielded cables and avoiding plugs whith plastic housings (e.g. D-Tap).

More information from Arri:

• Video explaining the phenomenon
• technical information (ca. 82kB)

• Size “S”: three²⁾ interfaces RS 3pin
• Size “M”: five³⁾ interfaces RS 3pin
• matching plugs⁴⁾ Output: S10F1C-P03M, W10F1C-P03M⁵⁾; Input: S10F1C-P03L, W10F1C-P03L⁶⁾
• distributors with fixed supply cable have a dedicated input⁷⁾
• fixed supply cable with RS connector⁸⁾
• different supply cables available

• presence and polarity display of voltage
• S/S an Tally signal is passed throug

• Voltage: 9 - 30 V
• Ampere: 0 - 3 A
• Temperature: -10 - 40°, not condensing

There are two different sizes available, each with a fixed cable or with a detachable, separate supply cable.

This product falls within the scope of Directive 2012/19 / EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of June 4, 2012 on waste electrical and electronic equipment (WEEE II).

Accordingly, this product must not be disposed of with household waste. There are the respective country-specific disposal rules that must be observed.